GRAB Dry® with Intersept® | Download MSDS Sheet

Grab Dry® is a professional grade cleaner that is ideal for everyday spots and stains. The crystal cleaning technology penetrates and encapsulates soil and stains and dries quickly for easy removal by vacuuming. Safe to use on nylon, wool, and stain resistant carpets and rugs.

How to Use

• Before Use: Always test a hidden section of the carpet for color-fastness.
• For Spots and Stains on Carpets and Rugs:
• Step #1: For heavily soiled areas use Grab Carpet Spotter as a pre-spray before broadcasting Grab Dry.
• Step #2: Applying evenly broadcast the Grab Dry Extraction Compound over the area to be cleaned. Not exceeding 20 ft. at a time.
• Step #3: Gently brush the Grab Dry onto the treated area using a soft brush or a counter rotating brush machine. Allow approximately 30 to 40 minutes to dry completely.
• Step #4: Vacuum the area thoroughly after drying to remove any encapsulated soil.

Carpet Spotter as a Pre-Spray | Download MSDS Sheet

Grab Carpet Spotter is a professional grade cleaner that is ideal for everyday spots and stains. The encapsulation technology penetrates and encapsulates soil and stains and dries quickly for easy removal by vacuuming. Safe to use on nylon, wool, and stain resistant carpets and rugs.

Grab Carpet Spotter can also be used as a pre-treatment cleaner when used with Grab Dry.

How to Use

• Before Use: Always test a hidden section of the carpet for color-fastness. For dry stains or spots vacuum area to be treated first to remove any loose soil. For wet stains or spots blot the area with a dry, clean colorfast cloth or sponge to remove any excess material.
• As a Pre-treatment:
• Step #1: Lightly spray the area to be cleaned completely before applying Grab Dry.
• For Spots and Stains on Carpets and Rugs:
• Step #1: Spray Carpet Spotter directly on the stain or spot. Use care to wet the spot, without over-saturating the carpet.
• Step #2: Gently massage the spotter into the soiled area using a clean dry cloth, lightly dampened sponge or a nonabrasive brush working toward the center of the stain. Blot any residual moisture from the area until the stain or spot no longer transfers from the carpet to the cloth or sponge. Reapply and repeat this step until stain or spot is removed.
• Step #3: Vacuum the area thoroughly after drying to remove crystals and encapsulated soil.